ProAc << Home << Product Range
X
Response Range

Response D Two

With superb midrange, and build quality, all make this a true compact monitor.

Overview

ProAc loudspeakers have a reputation for exceptional sound and build quality. Our enclosures may look conventional but this hides the advanced technology required to build a rigid and well-damped cabinet. Our loudspeakers are made in our factory at Brackley, England. They are slim and elegant, finished in gorgeous real wood veneer.

With first class sound quality, you’ll be listening to ProAc speakers long after you would have become tired of a fashionable but poor sounding alternative. We are renowned for producing compact high-end speakers evidenced by both Tablette and Response 1SC which have become iconic over the years.

The Response D TWO is a new speaker in this fine tradition, designed for the finest quality music and giving true monitor performance. The cabinet is made from a heavily damped, thin-wall rigid birch ply carcass, with a 25mm back panel. The bass driver is new, using the same cone technology as the Response D15 but with a revised coil and magnet. The tweeter is the same 1" silk dome as used in other ProAc models and the drive units are seamlessly mated with an HQ network designed and built by ProAc. Sound quality from the D TWO is one of extreme transparency; a lush and potent bass response and a silky detailed high frequency. The D TWO also have a huge sound stage with pinpoint imagery. The speakers are designed to sit on high mass stands from 18" high depending on your seating position.

Features

Nominal Impedance
8 ohms
Recommended Amplifiers
30 to 150 watts
Frequency Response
30hz to 30Khz
Sensitivity
88.5db linear for 1 watt at 1 metre
Bass Driver
New 61/2" (165mm) ProAc unit with Excel Magnet system, glass fibre weave cone and copper phase plug.
Tweeter
ProAc 1" (25mm) silk dome air cooled and inner damping.
Crossover
HQ network using the finest components with option for bi-wiring/bi-amping using oxygen cable.
Dimensions
17" (430mm) high, 8" (203mm) wide, 101/4" (260mm) deep
Weight
24 lbs (11kg) /cabinet
Mode
Stand mounted on rigid high mass.
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Maple.
Premium Finishes:
Rosewood, Ebony.

*Premium Finishes to order at extra cost*

Specifications

Nominal Impedance
8 ohms
Recommended Amplifiers
30 to 150 watts
Frequency Response
30hz to 30Khz
Sensitivity
88.5db linear for 1 watt at 1 metre
Bass Driver
New 61/2" (165mm) ProAc unit with Excel Magnet system, glass fibre weave cone and copper phase plug.
Tweeter
ProAc 1" (25mm) silk dome air cooled and inner damping.
Crossover
HQ network using the finest components with option for bi-wiring/bi-amping using oxygen cable.
Dimensions
17" (430mm) high, 8" (203mm) wide, 101/4" (260mm) deep
Weight
24 lbs (11kg) /cabinet
Mode
Stand mounted on rigid high mass.
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Maple.
Premium Finishes:
Rosewood, Ebony.

*Premium Finishes to order at extra cost*

Dealers

For a list of UK Dealers go to our Dealers Page
For a list of Worldwide Distributers go to our Distributers Page