ProAc << Home << Product Range
X
Tablette Range

Tablette 10

Meet the new exciting Tablette 10

Overview

The new ProAc Tablette 10 is a tenth generation of the Tablettes launched in 1979. The Tablette 10 is an all new design, using a thin walled heavy damped infinite baffle enclosure which is the same as the BBC LS3/5a. This design allows the Tablette 10 to be positioned against the wall, unlike a ported enclosure (not recommended).

The new Tablette 10 has cutting edge new drive units, the bass driver has a Paginna Mika cone which is reed leaves mixed with Mika and coated with an acoustic dope.

The crossover has been specially designed for a sealed enclosure with a network which shapes the response to give a rich bass and an extremely transparent midrange. The tweeter is our well known 1 inch silk dome used in many of ProAc's other models.

During the design several speakers were used as comparison those being the LS3/5a, ProAc D2, Spender BC1 and Quad Esl 57.

We urge people to listen and compare with other makes and models as we are sure you will find the music intoxicating.

The Tablette 10 is scheduled for release this Autumn.

Features

Nominal Impedance
10 ohms
Recommended Amplifiers
5 to 50 watts
Sensitivity
86 dB linear for 1 watt at 1 metre
Bass Driver
ProAc 5" with Paganni Mika cone, with acoustic coat.
Crossover
Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification.
Dimensions
Height: 12" (304.80mm), Width: 7" 1/2 (190.50mm), Depth: 6" 1/4 (158.75mm) including grille
Mode
Stand/Shelf mounting
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Maple, Silk White.
Premium Finishes:
Rosewood, Ebony.

*Premium Finishes to order at extra cost*

Specifications

Nominal Impedance
10 ohms
Recommended Amplifiers
5 to 50 watts
Sensitivity
86 dB linear for 1 watt at 1 metre
Bass Driver
ProAc 5" with Paganni Mika cone, with acoustic coat.
Crossover
Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification.
Dimensions
Height: 12" (304.80mm), Width: 7" 1/2 (190.50mm), Depth: 6" 1/4 (158.75mm) including grille
Mode
Stand/Shelf mounting
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Maple, Silk White.
Premium Finishes:
Rosewood, Ebony.

*Premium Finishes to order at extra cost*

Dealers

For a list of UK Dealers go to our Dealers Page
For a list of Worldwide Distributers go to our Distributers Page