K10

ProAc would like to introduce the flagship model K10.

The design team at ProAc has been striving for years to achieve a natural sound and in our opinion, we have achieved this. The K10 boasts excellent midrange detail and an impressive sound stage.

The unique K10 cabinet design has been further developed incorporating our proven 8-inch Kevlar coned bass driver, giving a wonderfully extended and natural bass response.

The K10 features the latest ProAc midrange unit with an ultra-lightweight 3-inch domed diaphragm loaded by a redesigned wave guide. This driver also has a felt open back to remove colouration, helping to achieve an outstanding open sound with exceptional detail.

The crossover on the K10 has been further modified, allowing the midrange to work to a higher frequency, which not only increases the power handling but also reveals detail that was previously not heard.

Our ProAc ribbon tweeter, as used throughout the K Series range, gives a sweet and detailed high frequency.

We urge people who are looking for the ultimate in sound reproduction to audition our flagship K10.

 

Featured veneer: Dark eucalyptus

Specification

Nominal Impedance

4 ohms

Recommended Amplifiers

10 to 500 watts

Frequency Response

20Hz-30Khz

Sensitivity

91.5 dB linear for 1 watt at 1 metre

Bass Driver

2x ProAc, 200mm (8”) professional drive units fitted with pure polymer impregnated and polished Kevlar weave cone with rear lacquer and concentric weighting.

Midrange

ProAc 75m (3”) light diaphragm unit with a new open felt back to help with colouration from the rear.

Tweeter Ribbon

The ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.

Crossover

Finest components on dedicated dual layer circuit board. ProAc Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification

Height (Cabinet)

1499mm (59”)

Width (Cabinet)

297mm (11.7”)

Depth (Cabinet)

457mm (18”)

Weight

57kg (126lb) each cabinet

Mode

Floor standing

Grille

Acoustically transparent crimplene

Standard Finishes

Black Ash, Mahogany, Cherry, Natural Oak, Silk White and Walnut.

Premium Finishes

Rosewood, Ebony, Tamo Ash, Dark Eucalyptus *Premium Finishes to order at extra cost*

Related Products

Due to the success of the 'K Series’ floor-standing speakers, we were asked to produce a stand-mounted speaker for the range.
For our more compact floor-standing K Series speaker, the K3, a specific Kevlar drive unit needed to be developed.
The K6 is designed for audiophiles and music lovers who are looking for a true high-end loudspeaker offering smooth reproduction and an impressively flat response throughout the frequency range.
The K6 Signature uses a similar cabinet to the K6 being an excellent size with its tall slim design. However, the K6 Signature is different in many ways.

"The most important part of a loudspeaker design is the designer's ear. It doesn't matter how perfect the recipe is, if the stew doesn't taste right then it's no good."

Stewart Tyler