Response DB3
A high-end stand-mount loudspeaker at an affordable price
The Response DB3 has a similar cabinet size to the Response DB1 but there are structural and visual differences. The DB3 also employs a different bass driver with a special surround, dust cap and crossover which have been chosen for their exceptional performance at a more affordable price.
The Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port at the rear of the cabinet. The tweeter is our ProAc 1-inch soft dome as used in other Response Range designs. This 1-inch silk dome has a superb flat response with electrostatic type detail and sweetness.
With the DB3, ProAc has created a small speaker with better efficiency and a rich sound that defies its physical size.
Featured veneer: Silk White
Specification
Nominal Impedance
8 ohms
Recommended Amplifiers
20 to 100 watts
Frequency Response
38Hz-30kHz
Sensitivity
88.5 dB linear for 1 watt at 1 metre
Bass /midrange
ProAc 127mm (5”) long throw unit with Pagina Mica cone and transparent dust cap
Tweeter
ProAc 25mm (1”) silk dome with special coolant
Crossover
Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification
Height (Cabinet)
12.5”(320mm)
Width (Cabinet)
7.28” (182mm)
Depth (Cabinet)
10.4” (280mm)
Weight
each 8.8Kg (19.6lb)
Mode
Stand mounting
Grille
Acoustically transparent crimplene
Standard Finishes
Black Ash, Mahogany, Cherry, Walnut, Oak, Silk White.
Premium Finishes
Rosewood, Ebony. *Premium Finishes to order at extra cost*
Related Products
"The most important part of a loudspeaker design is the designer's ear. It doesn't matter how perfect the recipe is, if the stew doesn't taste right then it's no good."
Stewart Tyler